Inversion sluice, Linerjet 150, kit DN75, 100, 150mm.
- Do you need more information about this product? We are happy to answer your questions.
We reserve ourselfs from liability for any faulty product information, please inform us of any faults.
Description
Article no.: 204150004
Linerjet 150 inversion sluice is specially designed for relining pipelines both inside and outside buildings, thanks to its small size and low weight, it is easy to handle and place at the work site.
Linerjet 150 is suitable for relining pipes from DN50mm. up to DN225mm. (liner thickness 5mm.)
The length that can be installed is basically only limited by the working time of the resin used.
The Linerjet 150 is delivered complete with an adjustable support, and inversion nozzles for DN75mm. DN100mm. and DN150mm. V-clamp and rubber gasket.
Supply pressure: 3-10 Bar. (43,5-145 psi.)
Air consumption: Minimum 600 liters/minute. (21 CFM.)
Pressure to bellows: 0-1 Bar. (0-14.5 psi.)
Pressure to liner: 0-1 Bar. (0-14,5 psi.)
Diameter range: DN50mm. up to DN225mm. (2"-9")
Height to center of inversin nozzle: 70-95 cm. (27,5"-37,5")
Overall height: 97-120 cm (38"-47")
Foot print: 55 x 55 cm. / (21.6" x 21.6" / 30.7" x 30.7")
Weight complete kit: 21.5 kg (47.4 lb.)
Weight of inversion unit: 13.5 kg (29.7 lb.)
Weight adjustable support: 6.5 kg (14.3 lb.)
Weight of inversion nozzle: approx. 0.45 Kg. (approx. 0.99 lb.)
Material: Aluminum and stainless steel
Price per piece.
Linerjet 150 is suitable for relining pipes from DN50mm. up to DN225mm. (liner thickness 5mm.)
The length that can be installed is basically only limited by the working time of the resin used.
The Linerjet 150 is delivered complete with an adjustable support, and inversion nozzles for DN75mm. DN100mm. and DN150mm. V-clamp and rubber gasket.
Supply pressure: 3-10 Bar. (43,5-145 psi.)
Air consumption: Minimum 600 liters/minute. (21 CFM.)
Pressure to bellows: 0-1 Bar. (0-14.5 psi.)
Pressure to liner: 0-1 Bar. (0-14,5 psi.)
Diameter range: DN50mm. up to DN225mm. (2"-9")
Height to center of inversin nozzle: 70-95 cm. (27,5"-37,5")
Overall height: 97-120 cm (38"-47")
Foot print: 55 x 55 cm. / (21.6" x 21.6" / 30.7" x 30.7")
Weight complete kit: 21.5 kg (47.4 lb.)
Weight of inversion unit: 13.5 kg (29.7 lb.)
Weight adjustable support: 6.5 kg (14.3 lb.)
Weight of inversion nozzle: approx. 0.45 Kg. (approx. 0.99 lb.)
Material: Aluminum and stainless steel
Price per piece.
Files and media
 | Attached file |