Calibration hose Airbagliner DN300mm.
- Do you need more information about this product? We are happy to answer your questions.
Description
Article no.: 140120300
Airbagliner calibration hose is a flexible tube of OPW fabric, coated with a thin layer of silicone on one side, with a welded seam. Primarily intended for use as an inner tube in flexible liners, for so-called "blind shots" or where extra security against leakage is desired.
Note that the Airbagliner must be inverted once before it is inverted into the liner, this is so that the silicone coated side ends up against the liner.
Due to its design, the Airbagliner may have some minimal leakage, this usually does not cause any problems.
Can handle bends up to 90°.
Compatible with most resin systems.
Diameter: 300mm.
Maximum pressure: 2 Bar.
Maximum temperature: 150°C.
Thickness: 0,33mm.
Color: white.
Original packaging: roll 100 meters.
Price per meter for full roll, 100 meters.
Also sold per meter.
Discount ladder.
100 meters: 20%, only applies to full rolls.
Note that the Airbagliner must be inverted once before it is inverted into the liner, this is so that the silicone coated side ends up against the liner.
Due to its design, the Airbagliner may have some minimal leakage, this usually does not cause any problems.
Can handle bends up to 90°.
Compatible with most resin systems.
Diameter: 300mm.
Maximum pressure: 2 Bar.
Maximum temperature: 150°C.
Thickness: 0,33mm.
Color: white.
Original packaging: roll 100 meters.
Price per meter for full roll, 100 meters.
Also sold per meter.
Discount ladder.
100 meters: 20%, only applies to full rolls.